Архив метки: OLIMEX

BB-VNH3SP30 – Мощный драйвер двигателя 30А

Опубликовано автор admin

BB-VNH3SP30-1

– Нагрузка до 30А;
– Напряжение питания 5.5-36В;
– LED индикатор состояния ШИМ;
– LED индикатор состояния направления;

Купить.

 

    |---------------------------------------------------------------------------|
    |            The hardware connections are as follows:                       |
    |--------------------------------|------------------------------------------|
    |  Connector at Olimexino-328    |      Connector at BB-VNH3SP30            |
    |--------------------------------|------------------------------------------|
    |    Not connected!              |          CTRL<1>,  VIN                   |
    |    Power<3>, 5V                |          CTRL<2>,  +5V                   |
    |    Power<4>, GND               |          CTRL<3>,  GND                   |
    |    Digital<9>                  |          CTRL<4>,  INA                   |
    |    Digital<13>                 |          CTRL<5>,  INB                   |
    |    Digital<11>                 |          CTRL<6>,  PWM                   |
    |    Digital<10>                 |          CTRL<7>,  ENA/DIAGA             |
    |    Digital<12>                 |          CTRL<8>,  ENB/DIAGB             |
    |--------------------------------|------------------------------------------|

OLIMEXINO-STM32 MAPLE / ARDUINO LIKE DEVELOPMENT BOARD

Опубликовано автор admin

ARDUINO / MAPLE like board with STM32F103RBT6.

FEATURES:

  • STM32F103RBT6 microcontroller
  • DCDC power supply allow power input voltage from 9 to 30V DC thus making possible to take virtually any power supply adapter on the market, also enable application which are in industrial power supply 24VDC.
  • carefully selected all components to work reliable in INDUSTIRAL temperature range -25+85C so the board can be used in INDUSTIRAL applications.
  • ULTRA LOW POWER voltage regulators and the consumption is only few microamps, which enables handheld and battery powered applications.
  • Li-Ion rechargable battery power supply option with BUILD-IN on board charger, so when you attach battery it is automatically charged and kept in this state until the other power source (USB or external adapter) is removed and it AUTOMATICALLY will power the board – no jumpers, no switches!
  • UEXT connector which allow many existing modules like RF, ZIGBEE, GSM, GPS to be connected
  • allow RTC – Real Time Clock.
  • CAN with driver allows automotive applications
  • micoSD-card for data logging
  • NOISE IMMUNE design.
  • Separate voltage regulator for the Analog part, which allow the ADC to be read correctly without the digital noise pickup.
  • Optionally if someone need higher precision and temperature stability in Analog reading we have provision on the board for Aref preciese source.
  • the LEDs and the BUTTONs are on the edge of the board so there is easy access even if the boards have shields on them
  • all components are LOWER than the connectors, so the shields do not interference with them
  • mini USB connector is used which is common and used in most cell phones, so you do not have to buy other cables
  • original Arduino design had flaw and the connectors were not spaced at 0.1″ this make perfo board use impossible, to keep the compatibility we have same spacing but we add next to this connector on 0.1″ which customer can use with perforated boards
  • all signals on the connectors are printed on top and on bottom of the board, so when you check with probe you know exactly which port you are measuring
  • 4 mount holes make board attachment easier

DOCUMENTS:

HARDWARE:

SOFTWARE: